Building a network model is a complex task. It starts first with data extraction from the geographical information system (GIS) via a special interface. This will include and deliver all pipe data, node geographic coordinates and equipment forming the basic network structure. Control equipment such as valves and controlling regulators are read or derived from GIS data; regulator devices often must be connected manually or corrected afterwards.

Next the inputs and outputs of the network have to be introduced. Aside from feeder points or underground gas storage the outputs — better said the outflows — are modeled by consumers. Each consumer (up to hundreds of thousands) has his individual set of data, static or dynamic. Static data are used for long term planning for a certain scenario, dynamic data is used for short term planning (i. e. some days). When the simulation finally starts the correct pressure data — at least for the most important points — must be given to the simulator. Consumer data, valve position and pressure data must be taken from different IT-systems: Energy Data Management (EDM) system and Process Control system (SCADA).