Biogas production is not possible without a sufficient quantity of anaerobic bacteria. In fresh manure, the concentration of these is low. Taking some effluent (10 to 30% of daily input) and putting it back into the digester is a way of inoculating the fresh manure with active microbial flora. This inoculation of fresh manure can increase gas production up to 30% and it is very important in a plug flow digester as there is almost no mixing between old and fresh slurry. The main nutrients required by microorganisms involved in anaerobic biodigestion are carbon, nitrogen, and inorganic salts. According to Buren (1983), a specific ratio of carbon to nitrogen must be maintained between 20:1 and 25:1, but this ratio will vary for different raw materials and sometime even for the same ones. The main source of nitrogen is human and animal excrement, while the polymers in crop stalks are the main source of carbon. Buren (1983) noted further that in order to maintain a proper ratio of carbon to nitrogen, there must be proper mixing of excrements with polymer sources. Since there are few common materials with a suitable ratio of carbon to nitrogen, production will generally not go well with only one source of material.