High-Efficiency fuel Channel

The High Efficiency fuel Channel (HEC) consists of a pressure tube, a ceramic insulator, a liner tube, and fuel bundles. Figure 5 shows a 3-D view of HEC. The outer surface of the pressure tube is exposed to a moderator. The moderator could be a liquid moderator such as heavy-water or a solid moderator. The purpose of using an insulator is to reduce the operating temperature of the pressure tube and heat losses from the coolant to the moderator. Low operating temperatures of the pressure tube would allow for the use of available materials such as Zr-2.5%Nb, which has low absorption cross-sections for thermal neutrons (Chow and Khartabil, 2008).

image291

Fig. 5. High efficiency fuel channel (based on Chow and Khartabil, 2008).

The proposed material for the ceramic insulator is Yttria Stabilized Zirconia (YSZ) (Chow and Khartabil, 2008). YSZ has a low neutron absorption cross-section, low thermal — conductivity and high corrosion resistance in exposure to water at supercritical conditions (Chow and Khartabil, 2008). These properties make YSZ a good candidate as an insulator. The liner, which is a perforated tube and made of stainless steel, intends to protect the ceramic insulator from being damaged during operation or possible refuelling due to stresses introduced by fuel bundles and from erosion by the coolant flow.